Why is it not suitable to use a wood splicer during thunderstorms?

The wood splicing machine is a kind of woodworking machinery, it is a special complete set of machine for splicing the short wood, which is composed of a comb machine and a docking machine.

When thunder strikes, the powerful current will cause certain damage to the wood machine, causing burnout of the module or loss of changed data, resulting in unnecessary losses.

Do not turn on the machine tool during thunderstorms; set up a lightning protection net on the roof of the CNC room; each CNC machine tool is well grounded, and the grounding resistance is less than 4Ω.

We should regularly check the battery of the wood splicer, and if the battery is damaged, it should be replaced in time. The data of the device is generally stored in its chip. If the chip is powered off or its operating voltage is lower than 5%, all data will be lost or changed. Therefore, check the battery every month and replace the failed battery in time.

The strength of the interface of the wood splicer is greater than that of the wood itself, the strength of the adhesive film is tough, not brittle, environmentally friendly and non-corrosive, and can completely replace the use of new wood.

The fully automatic wood joining machine only needs to put the wood into the workbench, and then press the work button switch, the machine will automatically push the wood into the butt slot for automatic alignment → automatic pressing → automatic pressure joining → automatic push → automatic shutdown, automatic High level and stable work, greatly reducing the labor intensity of workers and improving work efficiency.