What are the performance characteristics of the wood joining machine

The wood joining machine brings a new round of whirlwind to the market, which not only has a great change in aesthetics, although it is not as good as manual crafting, but it is suitable for good demand in the market. The development of automatic wood joining machine is a development suitable for the times.

The wood splicing machine can make the work materials with a comb depth of 30mm butt closely, and the wood splicing square is flat, normally 300-600mm long work materials, about 1,000-1,200 pieces per shift for 8 hours per person and machine.

The load cannot be disconnected when the splicer is running. After the completion, the machine cannot be loaded and unloaded immediately, and the operation can only be performed after the machine has completely stopped. If you find any abnormality in the operation of the equipment, you should immediately stop cutting off the power supply, and notify professional maintenance personnel to overhaul, and start the machine after troubleshooting.

The use of wood splicing machine can improve the utilization rate of wood, reduce the waste of resources, and achieve the purpose of long-term use of short wood and better use of inferior wood. Under these conditions, the short wood grows into a new industry, and its market space is huge. Some relevant experts pointed out that the rational use of wood and the strengthening of the recycling of waste wood have more obvious ecological benefits than afforestation.