What Should Be Paid Attention To When Using The Finger Joint Knife On The Comb Machine

The finger joint blade on the comb machine is made of hard alloy with high hardness and brittleness. It is extremely afraid of bumping and transporting to protect the blade. When moving or using, it should be handled with care to avoid damage.

1. All equipment must be equipped with a protective cover around the tool to avoid damage to the tool and flying debris and cause injury.

2. The processing must be started after confirming that the workpiece is clamped, otherwise the workpiece can easily be involved in the tool, forming a tie, and damage to the tool and equipment can easily cause the workpiece to fly out and cause an accident.

3. The power of the equipment and the thickness of the processing should be matched. The small horse-drawn cart will cause the car to be stuffy, damage the tool, and the tool will idling in the wood, which will make the wood paste and the tool wear and blunt.

4. Choosing a reasonable feed speed that is too fast or too slow will affect product quality and tool life.