How To Do The Maintenance Work Of The Wood Splicing Machine

The wood splicing machine is a special complete set of machines for splicing short wood into longer, which is composed of a comb machine and a docking machine, and is assisted by an air compressor. With the continuous advancement of technology, wood joining machines are divided into ordinary manual wood joining machines, semi-automatic wood joining machines, automatic wood joining machines and CNC wood joining machines. So how to do the maintenance work of the wood picker?

The continuous running time of the wood connecting machine is less than 10 hours a day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water, and the cooling water should be replaced regularly to prevent the water temperature from being too high; the connecting wood machine should be cleaned regularly. If there is dust in the electrical box, check whether the terminal screws are loose to ensure the safe and reliable use of the circuit.

The electrical control circuit must be connected according to the wiring method at the factory, and must not be changed arbitrarily during maintenance. Prevents short circuits, fires, loss of control or damage to electrical appliances. Turn off the main power when not working. Doing good maintenance on the main shaft bearing of the wood joining machine can not only prolong the service life of the machine, but also ensure the potential performance of the machine.