Precautions For Using The Panel Machine

The jigsaw machine is one of the main equipments for the production of blockboard (large core board). , extrusion, heating and other processes to make a full-width solid core board equipment.

Precautions for the use of the jigsaw machine:

1. Be careful not to pinch your hands

2. The glue and sundries adhering to the table should be cleaned up in time.

3. After the plate is clamped, the trigger of the air gun should be released in time, and the pressure should be stopped.

4. The screw rod and the movable part of the indenter should be refueled regularly.

5. Personnel who have not learned the operating procedures should not operate the equipment

Before using the panel machine, check whether the air pressure and power supply are normal, whether the pressing frame or the robot arm is moved to both sides, and whether the switch is in the ON position; when operating, pay attention to each completed operation and proceed to the next cycle. Whether the robot arm is moved to both sides, and whether the proximity switch is in the ON position, otherwise the machine cannot run.