How To Maintain And Maintain The Panel Machine

The panel machine consists of five parts: the panel machine host, the high-frequency generator, the hydraulic station, the feeder, the discharge table, and the control system. It has the characteristics of high degree of automation, simple and convenient operation, low labor intensity, short splicing cycle, and labor saving.

The general temperature of the working place of the panel machine is maintained at 25°C (+5°C difference). The humidity is maintained at 50% (+10% difference); ensure the cleanliness of the panel maker and the surrounding environment, and clean the panel machine regularly , In particular, check the factors around the machine that affect the corrosion and rust of the machine, and remove it in time.

It is necessary to avoid the stoppage or power failure of the panel assembly machine, because this will not cause the panel assembly machine to stop due to damage in the middle, and it will not affect the normal operation due to the failure of each component. You should also check the condition of each part of the imposition machine from time to time. If it is found that it is aging and loose, it should be replaced in time. Before running the imposition machine, a comprehensive inspection should be done.