Operating Procedures Of The Jigsaw Machine

Wood has always been one of the most commonly used materials in our lives, so there are many ways to process it, and the jigsaw machine is a kind of mechanical equipment in wood processing, so everyone knows the operating procedures of the jigsaw machine ?

The operator must be familiar with the performance, use and operation precautions of the machine before operation. It is strictly forbidden for beginners to operate the machine alone. Before use, check whether the air pressure and power supply are normal, whether the pressing frame or robot arm is moved to both sides, and whether the proximity switch is in the ON position. The manufacturer of the panel assembly reminds everyone to pay attention to whether the pressing frame or the robot arm is moved to both sides and whether the proximity switch is in the ON position when the next work cycle is completed after each operation is completed, otherwise the machine will not be able to run.

If the workpiece is short, pay attention to the uniformity of the length direction of the top plate of the measuring cylinder, and try to avoid stress on the side or less than half of the top plate, otherwise the lever will easily be damaged; 1-2mm lower than the thickness of the workpiece, otherwise it will affect the heating and splicing effect. The push plate is made of hard wood.