Maintenance Of Cold Press

There are many types of woodworking machinery, and cold press is one of them. In order to improve the use effect of the equipment, we must do correct maintenance to ensure the normal use of cold press machinery and equipment, and its application effect will be better. So do you know what the maintenance method of the cold press is?

The cold press should be thoroughly cleaned before it is put into use. It should be cleaned with 20% dilute sulfuric acid or dilute hydrochloric acid, diluted with 10% soda water, and then washed with water. Of course, if conditions permit, use special cleaning oil to clean internal components.

The cold press must be cleaned after each shift to keep the lifting screw clean. Then lubricate the worm gear, worm, and lift screw with calcium-based grease every week. The lifting screw and nut should be filled with 30# oil frequently.

The oil level of the oil cylinder of the cold press should be kept between 25-45mm. If the oil level is lower than 25mm, hydraulic oil should be added. When the oil cylinder is refueled, a block with a height of more than 100mm must be placed between the upper and lower table tops before oil filling operation.