What are the maintenance points of the panel machine

The panel machine is an important equipment necessary for many panel manufacturers. Whether the panel machine can operate normally is directly related to the production efficiency of the panel.

The frequently moving parts of the jigsaw machine equipment must be well maintained. These parts are generally cleaned and lubricated regularly. Only in this way can the normal operation of the equipment be ensured.

The electrical part of the panel machine is an important part of the operation of the equipment. We need to clean the dust and tighten the wire frequently to ensure that the electrical circuit has very good performance, so that it can work better.

We should regularly check whether the electrodes, circuit boards and electrical appliances have overheating and abnormal noise, check whether the instrument and computer display are normal, and make sure that the panel machine can operate normally.

The gear oil in the gearbox of the new machine should be replaced after one month of normal use, and the amount of oil can be added to the vicinity of the oil mirror. After each oil change, the machine works for about 2,000 hours, and the amount of oil changed is No. 90 or other ordinary gear oil.

The continuous operation time of the board assembly machine is less than 10 hours a day to ensure the cleanliness of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water, and the cooling water should be replaced regularly to prevent the water temperature from being too high. At the same time, we should pay attention to cleaning up the machine in time after using it, be sure to clean up the dust on the platform and the transmission system, and lubricate the machine regularly.