How to remove the oil seal of the cold press oil cylinder

The content of vapor in the compressed air of the cold press is determined by the air temperature, keeping the pressure of the compressed air unchanged, lowering the temperature of the compressed air can reduce the water vapor content, and the excess water vapor can quickly condense into a liquid.

First, all the heat absorbed in the evaporator and the heat converted by the compressor are transferred to the cooling medium, and finally the number of throttling pressure of the refrigerator and the expansion valve throttling valve is controlled and adjusted at the same time to control and adjust the liquid refrigerant entering the evaporator and divide the system into It is the high and low pressure side of the two parts.

Since the oil cylinder of the cold press is prone to oil leakage, we should not open the cold press for trial use, because oil leakage may cause damage to the cold press.

All series of cold presses are used for pressing furniture panels, wooden doors and various panels. The leveling and shaping of furniture can make the bonding between the boards more firm, and the pressure is strong and does not pull back.

Relying on our company's scientific research and development capabilities, we can also design and manufacture special non-national standard equipment according to user requirements, and provide technical advice and feasibility analysis reports for equipment projects.