What Protective Measures Should Be Taken When Operating The Wood Harvester in Winter
The wood splicing machine is to reprocess the waste wood produced by some construction industries or other industries, so that the waste wood can become a new resource that can be used again, which is of great significance to promoting sustainable development. However, due to the cold weather in winter, when operating the wood splicing machine The phenomenon of frostbite machines is very likely to occur. As a rookie in promoting sustainable development in my country, the wood harvester must be effectively used to reduce machine failures and maximize its productivity. Next, let's talk about what protective measures should be taken when operating the wood harvester in winter.
1. Before operating the machine, do not start it directly, but perform a "test machine". Pull the worktable to the left end of the machine to adjust the air pressure, wipe the guide rails and the operation, and start the test run to check whether the direction of rotation is correct.
2. Check the position of each part of the machine, and adjust it in time if it is found that the position is wrong. Correctly replace the motor wiring, and adjust the distance between the saw blade and the worktable according to the depth of the comb teeth. After adjustment, tighten the dovetail side top wire to prevent the saw blade motor from shifting by itself during operation. The adjustment of the comb tooth knife is based on the comb tooth wood. thickness and number of layers required to install the blade.
3. Check the small parts in the machine, screws and blades are all key inspection objects. To adjust the blade, tighten the nut on the knife shaft. When adjusting the height of the knife shaft, first loosen the locking handle of the knife shaft jacket, and turn the height adjustment screw to make the knife shaft height to the appropriate position. After adjustment, lock the handle.
4. When using the machine to operate, there must be someone to watch over it at all times. Pay attention to whether the machine has any noise or abnormal noise. If it is necessary, stop it in time to check. If the temperature of the motor is too high during use, the machine should be stopped. Continue to use after the motor temperature returns to normal.
In winter, special attention should be paid to the operation of the wood harvester. The temperature damage to the machine is very serious. Therefore, avoid placing the wood harvester in a cold environment for a long time, and take good insulation measures to let the wood harvester pass the winter safely. Continue to contribute to the sustainable development of the country.
