How To Use The Cold Press

Cold compressors are called cold dryer compressors. The content of vapor in the compressed air is determined by the air temperature. Keeping the pressure of the compressed air unchanged, reducing the temperature of the compressed air can reduce the water vapor content, and the excess water vapor can quickly condense into liquid. . The refrigeration dryer is a refrigeration technology that uses this principle to dry compressed air. So how to use the cold press?

After the cold press arrives at the factory, it must be placed horizontally, and the error per square meter is less than 1mm (it must be horizontal, otherwise the original press will be deformed when used for a long time); during the lifting process of the press, it is strictly forbidden to put your hand into the press, A used press should remain closed.

First, make sure that all the screws are tightened before starting the machine; After the cold press is turned on, it will work. When placing the workpiece, it should be placed in the center of the pressing table to ensure that the height below the two screw rods is the same; otherwise, the flat plate will be broken. Each piece of equipment has its own pressure, usually the pressure of the cold press is 50 tons, and the red pointer must be kept within Mpa.