How to do the maintenance of the wood splicing machine

The traditional manufacturing industry produces a large amount of waste wood, such as old furniture, waste wood boards, wood strips and other old wood. There are many ways to reuse these waste wood. Impact.

The continuous running time of the wood connecting machine is less than 10 hours a day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be short of water, and the cooling water should be replaced regularly to prevent the water temperature from being too high.

The distance between the saw blade and the worktable is adjusted according to the depth of the comb teeth; the shallow comb teeth are 10.5 mm, and the deep comb teeth are 16 mm. Determine the distance between the front and rear of the saw blade, and then tighten the top wire on the side of the dovetail to prevent the saw blade motor from shifting by itself during operation.

The traditional manufacturing industry produces a large amount of waste wood, such as old furniture, waste wood, wood strips and other old wood. There are many ways to reuse these waste wood, but they are inseparable from various technical means. After the wood is processed, it can meet or exceed the original function and meet the requirements of use.

If the wood harvester is not used for a long time, it should be refueled and empty on a regular basis to ensure the flexibility of the transmission system. Finally, it is necessary to regularly clean the dust in the electrical box of the docking wood machine, and check whether the screws of the terminals are loose, so as to ensure the safe and reliable use of the circuit.